Welcome to Your DIY Lamp Journey! 🛠️✨

We're thrilled you're here! This guide will walk you through building your very own lamp—think IKEA meets LEGO.

We've broken everything down into simple, easy-to-follow steps. No engineering degree required, no cryptic instructions that make you question reality. Just you, some parts, and perhaps a beverage (we recommend some Irn Bru).

So grab the box, channel your inner maker, and let's create something that'll make your interiors look chic in a pretentious way.💡


Opening Box.gif

What’s included in the box:

  1. 10 Wood Panels (Different sizes. Some with holes. We’ll get to that later)
  2. 2m long cable + G9 bulb socket + Bulb socket support 3D printed
  3. 12 3D printed Connectors
  4. 3D Printed Lampshade

Bulb’s not included. I would recommend G9 200lm warm white for a nice glow. Here’s the one I have:

https://www.amazon.co.uk/Energizer-Halogen-Equivalent-220-240V-Lumens/dp/B0D3M2G48B

252A2614.webp

252A2616.webp

252A2628.webp

SCR-20251228-rulp.png

So what you should have:

Panels

  1. 6 pc 10 X 10 cm Panels (Panel A)
  2. 2 pc 10 X 9 cm Panels (Panel B)
  3. 1 pc Panel C
  4. 1 pc Panel D
  5. 1 pc Lampshade

Base Connectors

  1. 3 pc Base A
  2. 3 pc Base B
  3. 1 pc Base C
  4. 1 pc Base D

SCR-20251228-sggf.png

SCR-20251228-sleh.png

Middle Connectors

  1. 1 pc Mid A
  2. 1 pc Mid B
  3. 1 pc Mid C
  4. 1 pc Mid D

STEP 1 :

IMAGE 1.1

IMAGE 1.1

IMAGE 1.2

IMAGE 1.2

IMAGE 1.3

IMAGE 1.3

IMAGE 1.4

IMAGE 1.4

IMAGE 1.5

IMAGE 1.5

IMAGE 1.6

IMAGE 1.6

Grab one of the 10X10 (Panel A).

Grab 4 of the Base connectors.

(2pc Base A + 2pc Base B)

Push in the connectors across the 4 corners of the panel.

Make sure the clips face each other. (see image 1.1 and 1.2)

The clip side is the front face of the lamp.

STEP 2 :